image
Home Journals Journal of Inorganic Materials
Journal of Inorganic Materials

Abbreviation (ISO4): J Inorg Mat      Editor in chief: Lidong CHEN

About  /  Aim & scope  /  Editorial board  /  Indexed  /  Contact  / 
Online first  /  Current issue  /  All issues  /  Top access  /  RSS

Journal of Inorganic Materials >

0 0

DOI: https://doi.org/10.15541/jim20240138

Preparation of MAPbI3 Perovskite Solar Cells/Modules via Volatile Solvents

Expand
  • 1. School of Materials Science and Engineering, Hubei University, Wuhan 430062, China;
    2. National Local Joint Laboratory for Advanced Textile Processing and Clean Production, Wuhan Textile University, Wuhan 430073, China
ZHOU Zezhu (1995-), male, PhD candidate. E-mail: zhouzezhu@stu.hubu.edu.cn

Received date: 2024-03-21

  Online published: 2024-07-03

Supported by

The Key Research and Development Program of Hubei Province (2022BAA096); Hubei Province Science And Technology Innovation Talent Plan Project (2023DJC081)

Fold

Abstract

The fabrication of large-area, high-efficiency perovskite solar cell modules (PSM) represent a pivotal stage in the industrialization of Perovskite Solar Cells (PSCs). Leveraging volatile solvents within perovskite precursors facilitates rapid solvent evaporation post-liquid film formation, obviating the necessity for subsequent treatments such as anti-solvent procedures or annealing. This streamlined approach offers distinct advantages in the industrialization trajectory of perovskite solar cells. Nonetheless, perovskite films synthesized utilizing volatile solvent systems often exhibit accelerated crystallization kinetics, yielding diminutive grain dimensions and elevated defect densities within the films, consequently compromising device efficiency and stability. This study devised a volatile solvent system comprising methylamine/acetonitrile (MA/ACN) for the production of MAPbI3 perovskite solar cells/modules. Incorporation of an optimal quantity of PbCl2 into the perovskite precursor solution served to retard crystallization kinetics and passivate grain boundary imperfections. Notably, small-area devices fabricated via this methodology demonstrated a peak photovoltaic conversion efficiency (PCE) of 21.21%, alongside enhanced operational stability. Furthermore, perovskite solar cell modules engineered through this approach achieved a PCE of 18.89%. This study presents a novel paradigm for advancing the large-scale industrial manufacturing of perovskite solar cells.

Key words： perovskite solar cell; MAPbI3; volatile solvents; large-scale perovskite solar module

Cite this article

ZHOU Zezhu, LIANG Zihui, LI Jing, WU Congcong . Preparation of MAPbI3 Perovskite Solar Cells/Modules via Volatile Solvents[J]. Journal of Inorganic Materials, 0 : 0 . DOI: 10.15541/jim20240138

References

[1] AKIHIRO K, KENJIRO T, YASUO S,et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. Journal of the American Chemical Society, 2009, 131(17): 6050.
[2] LEE M M, TEUSCHER J, MIYASAKA T, et al. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science, 2012, 338(6107): 643.
[3] KIM M, JEONG J, LU H, et al. Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells. Science, 2022, 375(6578): 302.
[4] NREL. Best research-cell efficiency chart [2024-04-04].https://www.nrel.gov/pv/cell-efficiency.html.
[5] YANG Y, LIU C, DING Y, et al. A thermotropic liquid crystal enables efficient and stable perovskite solar modules. Nature Energy, 2024, 9(3): 316.
[6] LI M, ZHU Z, WANG Z, et al. High-quality hybrid perovskite thin films by post-treatment technologies in photovoltaic applications. Advanced Materials, 2023, 36(7): 2309428.
[7] HUI Z, XU Z, ZHU C, et al. Progress on Large-area organic-inorganic hybrid perovskite films and its photovoltaic application. Journal of Inorganic Materials, 2024, 39(5): 457.
[8] LI D, ZHANG D, LIM K S, et al. A review on scaling up perovskite solar cells. Advanced Functional Materials, 2021, 31(12): 2008621.
[9] CHEN C, GAO J, FENG S P.The strategies for widening processing windows for perovskite solar cells: a mini review on the role of solvent/antisolvent. International Materials Reviews 2023, 68(3): 301.
[10] TAYLOR A D, SUN Q, GOETZ K P, et al. A general approach to high-efficiency perovskite solar cells by any antisolvent. Nature Communications, 2021, 12(1): 1878.
[11] CHOI H, CHOI K, CHOI Y, et al. A review on reducing grain boundaries and morphological improvement of perovskite solar cells from methodology and material-based perspectives. Small Methods, 2019, 4(5): 1900569.
[12] NG A, REN Z, HU H, et al. A Cryogenic process for antisolvent-free high-performance perovskite solar cells. Advanced Materials, 2018, 30(44): 1804402.
[13] CASSELLA E J, SPOONER E L K, SMITH J A, et al. Binary solvent system used to fabricate fully annealing-free perovskite solar cells. Advanced Energy Materials, 2023, 13(11): 2203468.
[14] LIANG Z, SHI Y, YUAN T, et al. Distinct reaction route toward high photovoltaic performance: perovskite salts versus crystals. ACS Applied Energy Materials, 2023, 6(4): 2247.
[15] WU C, WANG K, LI J, et al. Volatile solution: the way toward scalable fabrication of perovskite solar cells? Matter, 2021, 4(3): 775.
[16] WU C, WANG K, YAN Y, et al. Fullerene polymer complex inducing dipole electric field for stable perovskite solar cells. Advanced Functional Materials, 2019, 29(12): 1804419.
[17] CHEN Q, ZHOU H, SONG T B, et al. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells. Nano Letters, 2014, 14(7): 4158.
[18] CHEN Y, MENG Q, XIAO Y, et al. Mechanism of PbI2 in situ passivated perovskite films for enhancing the performance of perovskite solar cells. ACS Applied Materials & Interfaces, 2019, 11(47): 44101.
[19] GAO B, HU J, ZUO Z, et al. Doping mechanism of perovskite films with PbCl2 prepared by magnetron sputtering for enhanced efficiency of solar cells. ACS Applied Materials & Interfaces, 2022, 14(35): 40062.
[20] GAO Y, LIU C, XIE Y, et al. Can nanosecond laser achieve high-performance perovskite solar modules with aperture area efficiency over 21%? Advanced Energy Materials, 2022, 12(41): 2202287.
[21] XIE Y, DUAN J, PENG L, et al. Understanding the mechanism of PbCl2 Additive for MAPbI3-based perovskite solar cells. Advanced Photonics Research, 2021, 2(8): 2100012
[22] LING X, GUO J, SHEN C, et al. High-throughput deposition of recyclable SnO2 electrodes toward efficient perovskite solar cells. Small, 2023, 20(18): 2308579.
[23] JIN B, MING Y, WU Z, et al. Silk fibroin induced homeotropic alignment of perovskite crystals toward high efficiency and stability. Nano Energy, 2022, 94: 106936.
[24] ZHAO J J, SU X, MI Z, et al. Trivalent Ni oxidation controlled through regulating lithium content to minimize perovskite interfacial recombination. Rare Metals, 2021, 41(1): 96.
[25] DAI X, ZHANG L, QIAN Y, et al. Controlling vertical composition gradients in Sn-Pb mixed perovskite solar cells via solvent engineering. Journal of Inorganic Materials, 2023, 38(9): 1089.
[26] CHENG J, CHOI I, KIM W, et al. Wide-band-gap (2.0 eV) perovskite solar cells with a VOC of 1.325 V fabricated by a green-solvent strategy. ACS Applied Materials & Interfaces, 2023, 15(19): 23077.
[27] JIANG X, ZHANG B, YANG G, et al. Molecular dipole engineering of carbonyl additives for efficient and stable perovskite solar cells. Angewandte Chemie International Edition, 2023, 62(22): e202302462.
[28] LI C, WANG X, BI E, et al. Rational design of Lewis base molecules for stable and efficient inverted perovskite solar cells. Science, 2023, 379(6633): 690.
[29] CHEN S, YU X, CAI X, et al. PbCl2-assisted film formation for high-efficiency heterojunction perovskite solar cells. RSC Advances, 2016, 6(1): 648.
[30] WANG P, ZHAO J, LIU J, et al. Stabilization of organometal halide perovskite films by SnO2 coating with inactive surface hydroxyl groups on ZnO nanorods. Journal of Power Sources, 2017, 339: 51.
[31] DING T, FENG P, SUN X, et al. Perovskite film passivated by Fmoc-FF-OH and its photovoltaic performance. Journal of Inorganic Materials, 2023, 38(9): 1076.
[32] GALATOPOULOS F, SAVVA A, PAPADAS I T, et al. The effect of hole transporting layer in charge accumulation properties of p-i-n perovskite solar cells. APL Materials, 2017, 5(7): 076102.
[33] HAILEGNAW B, SARICIFTCI N S, SCHARBER M C.Impedance spectroscopy of perovskite solar cells: studying the dynamics of charge carriers before and after continuous operation.Physica Status Solidi A, 2020, 217(22): 2000291.
Options
Outlines

/

〈 〉