Switching Impulse Flashover Characteristics of Air Gap of Electric Power Fittings in Value Hall at the Altitude of 2 400 m

Libin MA, Lei LIU, Chao GAO, Zhibin ZHAO

South Power Sys Technol ›› 2016, Vol. 10 ›› Issue (11) : 9-15.

PDF(2535 KB)
Home Journals Southern Power System Technology
Southern Power System Technology

Abbreviation (ISO4): South Power Sys Technol      Editor in chief:

About  /  Aim & scope  /  Editorial board  /  Indexed  /  Contact  / 
PDF(2535 KB)
South Power Sys Technol ›› 2016, Vol. 10 ›› Issue (11) : 9-15. DOI: 10.13648/j.cnki.issn1674-0629.2016.11.002
HVDC Transmission & Power Electronics

Switching Impulse Flashover Characteristics of Air Gap of Electric Power Fittings in Value Hall at the Altitude of 2 400 m

Author information +
History +

Abstract

In order to analyze the air gap flashover characteristics of switching impulse voltage of fittings in Xinsong converter station at the altitude of 2 400 m, according to the fittings structure size of valve hall in Chuxiong converter station, this paper selects Φ750 mm/Φ880 mm cap, Φ1 200×300 mm/Φ1 600×300 mm/Φ1 900×300 mm grading ring and Φ1 100 mm/ Φ1 600 mm/ Φ2 000 mm equalizing ball, all in typical size, and carries out an experiment in Kunming UHV base at the altitude of 2 100 m. On this basis, this paper checks the air clearance of transmission side valve hall in Xinsong station and presents the discharge voltage curves for different altitudes after altitude correction. The study of air gap discharge characterstics and altitude correction provides a reference for practical engineering.

Key words

converter station / fittings in the valve hall / air gap / switching impulse discharge / altitude correction.

Cite this article

Download Citations
Libin MA , Lei LIU , Chao GAO , et al. Switching Impulse Flashover Characteristics of Air Gap of Electric Power Fittings in Value Hall at the Altitude of 2 400 m[J]. Southern Power System Technology. 2016, 10(11): 9-15 https://doi.org/10.13648/j.cnki.issn1674-0629.2016.11.002

References

[1]
张文亮, 于永清, 李光范, 等. 特高压直流技术研究[J]. 中国电机工程学报, 2007, 27(22): 1-7.
ZHANG Wenliang, YU Yongqing, LI Guangfan, et al. Researches on UHVDC technology[J]. Proceedings of the CSEE, 2007, 27(22): 1-7.
[2]
舒印彪, 张文亮. 特高压输电若干关键技术研究[J]. 中国电机工程学报, 2007, 27(31): 3-8.
SHU Yinbiao, ZHANG Wenliang. Research of key technologies for UHV transmission[J]. Proceedings of the CSEE, 2007, 27(31): 3-8.
[3]
马悦, 刘建东. 高海拔地区特高压换流站外绝缘修正方法研究[J]. 电气应用, 2015, 34(22): 69-72, 125.
MA Yue, LIU Jiandong. Analysis on modified method of insulation of UHV converter station[J]. Electrotechnical Application, 2015, 34(22): 69-72, 125.
[4]
章润陆, 陆宠惠. 超高压线路外绝缘气象修正系数的统计分布和海拔修正[J]. 高电压技术, 1979, 5(4): 3-15.
ZHANG Runlu, LU Chonghui. Meteorological correction coefficient of statistical distribution and altitude correction of external insulation of UHV transmission lines[J]. High Voltage Engineering, 1979, 5(4): 3-15.
[5]
NICHOLS D K, BOOKER J R, LARZEIERE W. Testing and commissioning of modular UHV AC outdoor test system[J]. IEEE Transactions on Power Apparatus and Systems, 1984, 103(7): 1916-1922.
[6]
KNUDSEN N, ILICETO F. Flashover tests on large air gaps with DC voltage and with switching surges superimposed on DC voltage[J]. IEEE Transactions on Power Apparatus and Systems, 1970, 89(5/6): 781-788.
[7]
HUANG C F, ALLEN N L, GREAVES D A. High voltage circuits for application of composite voltages to test gaps[J]. IEE Proceedings of Science Measurement and Technology, 1999, 146(2): 64-69.
[8]
张国稳, 祁光胜. 主变压器高压套管将军帽缺陷分析及处理[J]. 电网与清洁能源, 2012, 28(4): 98-101.
ZHANG Guowen, QI Guangsheng. Analysis and treatment of defects on the main transformer HV bushing coupler[J]. Power System and Clean Energy, 2012, 28(4): 98-101.
[9]
黄道春, 黄正芳, 王国利, 等. 特高压交流输电线路瓷绝缘子串电位和均压环电场分布计算模型的简化[J]. 高电压技术, 2012, 38(9): 2163-2170.
HUANG Daochun, HUANG Zhengfang, WANG Guoli, et al. Calculation model simplification for porcelain insulator string potential and grading ring surface electric field distribution of UHV AC transmission line[J]. High Voltage Engineering, 2012, 38(9): 2163-2170.
[10]
邓桃, 宿志一, 范建斌, 等. ±800 kV特高压直流线路复合绝缘子均压环优化设计[J]. 电网技术, 2010, 34(8): 31-35.
DENG Tao, SU Zhiyi, FAN Jianbin, et al. Design optimization of grading ring of composite insulators for±800 kV UHVDC lines[J]. Power System Technology, 2010, 34(8): 31-35.
[11]
薄学微, 卞星明, 王黎明, 等. 750 kV交流复合绝缘子均压环优化设计[J]. 高压电器, 2010, 46(12): 5-8.
BO Xuewei, BIAN Xingming, WANG Liming, et al. Optimal design of grading rings for 750 kV AC composite insulator[J]. High Voltage Apparatus, 2010, 46(12): 5-8.
[12]
KNUDSEN N, ILICETO F. Flashover tests on large air gaps with DC voltage and with switching surges superimposed on DC voltage[J]. IEEE Transactions on Power Apparatus and Systems, 1970, 89(5/6): 781-788.
[13]
全国高电压试验技术和绝缘配合标准化技术委员会. 高电压试验技术, 第1部分:一般定义及试验要求:GB/T 16927.1—2011[S]. 北京: 中国标准出版社, 2011.
[14]
全国高电压试验技术和绝缘配合标准化技术委员会. 高电压试验技术第二部分:测量系统: GB/T 16927.2—2012[S]. 北京: 中国标准出版社, 2012.
[15]
High-voltage test techniques, Part 1: General definition and test requirements: IEC 60060-1[S].
[16]
张刘春, 张翠霞, 张搏宇, 等. ±800 kV级联多端特高压直流输电工程的绝缘配合[J]. 电网技术, 2012, 36(12): 60-65.
ZHANG Liuchun, ZHANG Cuixia, ZHANG Boyu, et al. Insulation coordination of±800 kV cascaded multi-terminal DC transmission project[J]. Power System Technology, 2012, 36(12): 60-65.
PDF(2535 KB)

Accesses

Citation

Detail

Sections
Recommended

/