PDF(1629 KB)
Research on Seismic Performance of Flexible DC Converter Valve with Diagonal Rod Insulator
Chenglin REN, Xiang LU, Liangfu BI, Bin YANG, Lihong ZHANG, Wei LÜ, Lei GUO, Shengbo JIN
South Power Sys Technol ›› 2026, Vol. 20 ›› Issue (3) : 1-7.
PDF(1629 KB)
PDF(1629 KB)
Research on Seismic Performance of Flexible DC Converter Valve with Diagonal Rod Insulator
In order to improve the seismic performance of the supported flexible DC converter valve, some equipment suppliers have added diagonal rod insulators between the support insulators. It is necessary to study the impact of the layout scheme and pre-tension force of the diagonal rod insulators on the overall seismic performance of the converter valve. Combined with a converter valve, finite element numerical simulation technology is used in a certain engineering project. Firstly, modal analysis is carried out to study the arrangement scheme of diagonal rod insulators and the influence of pre-tension force value on the dynamic characteristics of the valve tower. Then, the vibration mode decomposition response spectrum method and nonlinear time history analysis method are respectively used to conduct dynamic analysis of the valve tower. The results show that the addition of diagonal rod insulators can significantly increase the fundamental frequency of the converter valve tower, but the magnitude of the pre-tension force of the diagonal rod insulator has a relatively small impact on the overall frequency of the valve tower structure. The results obtained by the time history method are generally greater than those obtained by the response spectrum method. Because it can accurately simulate the nonlinear characteristic of the diagonal rod insulator which can be pulled but not compressed, it is recommended to use the time history method to study the seismic performance of pillar type electrical equipment with diagonal rod insulators.
flexible DC converter valve / diagonal rod insulator / response spectrum method / time history method / seismic performance
| [1] |
|
| [2] |
|
| [3] |
王彦峰,李峰,余梦泽,等.基于6.5 kV压接式功率器件的MMC柔性直流功率模块设计和验证[J].南方电网技术,2025,19(12):63 - 74.
|
| [4] |
|
| [5] |
马志荣, 娄彦涛, 孙小平, 等. 海上柔直换流阀塔运行期间的振动性能研究[J]. 高压电器, 2022, 58(3): 140 - 147.
|
| [6] |
吴嘉欣. 地震作用下带电力设备大型换流站阀厅结构抗倒塌性能研究[D]. 广州: 广州大学, 2013.
|
| [7] |
魏文晖, 张迪, 喻梦, 等. 带悬吊质量结构的多维地震反应[J]. 哈尔滨工业大学学报, 2014, 46(4): 98 - 104.
|
| [8] |
张伟为, 于海波, 高彪, 等. 特高压悬吊换流阀地震模拟振动台实验研究[J]. 高压电器, 2022, 58(8): 142 - 149.
|
| [9] |
|
| [10] |
|
| [11] |
高彪, 张伟为, 于海波, 等. 支撑式换流阀塔的抗地震设计[J]. 机械设计与制造工程, 2018, 47(11): 35 - 39.
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
于海波, 刘彬. 有限元分析在特高压换流阀塔结构抗震设计中的应用[J]. 高压电器, 2016, 52(8): 184 - 188.
|
| [16] |
吴小峰, 孙启国. 特高压悬吊换流阀塔抗震分析[J]. 世界地震工程, 2011, 27(2): 207 - 210.
|
| [17] |
黄明铎. 悬吊式换流阀塔阻尼比计算及抗震分析方法研究[D]. 北京: 北方工业大学, 2021.
|
| [18] |
徐俊鑫, 谢强, 杨振宇, 等. ±800 kV特高压换流阀塔-厅整体抗震性能分析[J]. 高压电器, 2020, 56(1): 96 - 103.
|
| [19] |
朱新华, 张承, 谢云龙, 等. 柔性直流输电换流阀抗震性能研究[J]. 中国电业(技术版), 2014(8): 19 - 22.
|
| [20] |
涂明晖. 支撑式柔性直流换流阀塔参数识别与隔震性能研究[D]. 广州:华南理工大学, 2022.
|
| [21] |
章银龙, 施延龄, 游焕洋, 等. 拉杆复合绝缘子FKL-±420/40SS[Z]. 绍兴: 浙江金凤凰电力科技有限公司, 2019 - 06 - 16.
|
| [22] |
张其浩, 杨亚弟, 苏文藻, 等. 绝缘子拉杆式电气设备的抗震分析[J]. 世界地震工程, 1989(2): 30 - 38.
|
| [23] |
何畅, 谢强, 杨振宇, 等. ±800 kV特高压直流滤波电容器抗震性能分析[J]. 南方电网技术, 2017, 11(5): 9 - 16,23.
|
| [24] |
刘朝丰, 金松安, 李龙, 等. 具有预应力的某型直流滤波电容器载荷分析[J]. 高压电器, 2015, 51(4): 151 - 156.
|
| [25] |
张若愚, 曹枚根, 毛宇, 等. 增设拉线对特高压直流复合避雷器地震响应的影响分析[J]. 南方电网技术, 2020, 14(4): 31 - 38.
|
| [26] |
袁威. 不同弹拨力度下琵琶琴弦振动特性及声学品质的研究[D]. 济南: 山东建筑大学, 2022.
|
| [27] |
尹越, 冯涛, 郑力. 预应力钢结构自振特性研究[J]. 天津大学学报(自然科学与工程技术版), 2017, 50(S1): 169 - 174.
|
| [28] |
王储, 黄呈伟, 宋欣蕾, 等. 拉索-铝合金网架的自振频率分析[J]. 低温建筑技术, 2016, 38(1): 73 - 75.
|
| [29] |
刘正权, 刘海波, 董人文. 点支式玻璃幕墙张拉索杆支承体系自振特性参数分析[J]. 建筑结构, 2008(10): 114 - 116.
|
| [30] |
王飞, 李红明, 唐柏鉴, 等. 单折线体外索对简支钢梁自振频率的影响[J]. 江苏科技大学学报(自然科学版), 2020, 34(1): 105 - 110.
|
| [31] |
|
| [32] |
中华人民共和国国家质量监督检验检疫总局,国家标准化管理委员会. 中国地震动参数区划图: GB 18306—2015 [S].北京:中国标准出版社,2015.
|
| [33] |
中华人民共和国住房和城乡建设部,国家质量监督检验检疫总局. 电力设施抗震设计规范: GB 50260—2013 [S].北京:中国计划出版社,2013.
|
/
| 〈 |
|
〉 |